Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Winchester
Most chimney inspections in Winchester run between $150 and $450, depending on whether you need a standard Level 1 visual check or a Level 2 camera scan. A Level 2 inspection, which is what we recommend for most Winchester homes built after 1990, provides video evidence of what’s actually happening inside your flue. Our crews know the difference between a chimney that just needs sweeping and one that’s hiding corrosion from years of alkaline dust. Call (725) 220-6109 for a written quote before any work begins.

Why Ashby Chimney Las Vegas Is Winchester’s Preferred Chimney Inspection Company
Winchester homeowners call us because we say what we’ll do, write down the price, and then stand behind the work. Our Chimney Inspection team is led by Nathan Corliss, who has spent more than two decades working on the prefabricated metal chimneys that dominate Winchester’s 1990s-to-2010s housing stock. That experience matters here specifically: a chimney that looks fine from the roof can be quietly corroding from the inside, and only a camera sees it.
We’re not a national chain. We’re an independently owned and operated company under the Kingswell Guarantee, which means every repair carries a written guarantee and a free second visit if something fails. Winchester customers tell us the same thing, whether they’re off Boulder Highway or near the Desert Rose Golf Course: they’ve had contractors who didn’t show up, or who doubled the price at the door. Our answer is the Kingswell Way: say the price, arrive in the window we give you, leave the property cleaner than we found it, put the guarantee in writing, and come back if the repair fails.
Styles & brands we work with





Chimney Fire in Winchester
Chimney fire prevention in Winchester starts with understanding that the biggest threat here is rarely visible from the hearth. Most Winchester chimneys are prefabricated metal flues, and while they’re safe when intact, they corrode differently than masonry. Fine alkaline dust from the Mojave settles inside the flue, and over several years it can eat pinholes through the liner. Once that happens, a chimney fire can escape the flue entirely. A Level 2 camera inspection costs $250 to $450 in Winchester and is the only way to find this kind of hidden damage before it matters.
What Our Technicians Look For
When we inspect a Winchester chimney for fire risk, we check creosote buildup first. Year one glaze is normal; thick, tar-like third-degree creosote is not. We also look for corrosion on the flue walls, which reads as white or green staining on camera footage. Finally, we check the chimney cap. An uncapped flue in Winchester collects dust, bird nests, and monsoon debris.
Signs You Need an Inspection Before You Burn
If smoke rolls back into the room when you light a fire, or you smell something sharp and asphalt-like near the fireplace, stop using it and call us. Those are signs of a draft problem or creosote ignition. Even if the fireplace seems fine, a chimney that hasn’t been inspected in two years or more is due.
Level 2 Chimney Inspection in Winchester
A Level 2 Chimney Inspection in Winchester is the service we recommend for most local homes, and it’s a step up from a basic visual check because it includes a camera run through the full length of the flue. In Winchester, where most chimneys are prefabricated metal units in tract homes built between 1990 and 2010, this matters more than it does in older neighborhoods with masonry stacks. Alkaline desert dust settles inside the flue and slowly corrodes the liner from the inside out. You cannot see that from the roof or the firebox. Only a camera shows it.
When a Level 2 Is Required
If you’ve changed fuel type, say from wood to gas, or if the home changed hands recently, a Level 2 inspection is the right call. So is any chimney that’s been through a chimney fire, a lightning strike, or a good shake from a monsoon thunderstorm. Real estate transactions in Winchester routinely need Level 2 inspections, and we provide photo reports you can share with agents or insurance.
What It Costs and What You Get
In Winchester, a Level 2 chimney inspection typically runs $250 to $450. The price includes a full camera scan, written findings, and a photo report we walk you through before we leave. If we find something that needs repair, you’ll get a written quote before any work starts, never a surprise invoice after the fact.

Trusted Brands We Service in Winchester
Prefabricated chimneys in Winchester are built around a handful of industry-standard components, and we keep the common ones on hand. That includes liners and caps from Gelco, dampers from Copperfield, and flashings from Olympia Chimney. Stocking local parts means we don’t have to put a postponed repair on hold while something ships from a warehouse in Ohio. When we find a cracked cap or a corroded liner section during an inspection, we can often quote and schedule the repair the same day, with materials we trust, not whatever happened to be in the back of the van.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Inspection Problems We See in Winchester Homes
- Cracked chimney crowns from monsoon wind and rain. Winchester’s summer storms can drive water hard into a chimney chase. Over time, hairline cracks in the crown widen, water gets into the flue, and you’ll see a ceiling stain below the flashing line.
- Alkaline dust corrosion inside prefabricated metal flues. This is the most Winchester-specific problem we see. The fine dust that blows in from the desert settles inside the flue and corrodes it from the inside. A chimney that’s never been cleaned can look nearly perfect on the outside and be compromised within.
- Bird nests and debris in uncapped chimneys. Winchester has a lot of rental and second homes. When a property sits vacant for a season, migratory birds find the open flue and build nests. The first fire of the season pushes smoke right back into the house.
- Flashing failures after high wind events. The flat roof lines on many Winchester tract homes make flashing more exposed than it is on a steep roof. Wind-driven rain can work its way under older flashing and travel down the chimney chase, showing up as a water stain on the ceiling a week later.
Pricing for Chimney Inspection in Winchester, NV
A standard Level 1 chimney inspection in Winchester runs $150 to $250. Level 2 inspections, which include a full camera scan of the flue, run $250 to $450. If you add a chimney sweep at the same time, expect to pay $250 to $400 for the combined visit. The big variable in Winchester is access: single-story homes with easy roof access cost the least, while two-story homes with steep pitches or tight chases take more time. We give a written price before any work starts, so the number you approve is the number you pay. Call (725) 220-6109 and we’ll give you an exact figure for your home.
We Also Serve Cities Near Winchester
If you’re just outside Winchester, we run the same written-price inspections in Las Vegas, Paradise, Summerlin South, and Southern Highlands. Scheduling is coordinated through our Las Vegas office, and crews serve Winchester locally.
Serving Winchester, NV - Our Local Coverage Area
We’re based in the Winchester area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in Winchester
Because most Winchester chimneys are prefabricated metal flues from the 1990s to 2010s, and the alkaline desert dust we mentioned earlier settles inside them and corrodes the liner from the inside. A visual inspection cannot see that. The camera can. If your home is older than 15 years and has never had a camera inspection, start there. Call (725) 220-6109 to book one.
Winchester sits in an open, flat part of the valley, so monsoon winds get a clean run at your roofline. Wind-driven rain gets pushed under exposed flashing where the chimney meets the roof, and over time that water travels down the chase. The first sign is usually a brown stain on the ceiling near the fireplace. The fix starts with a chimney inspection to see whether the flashing or the crown is the entry point. Call (725) 220-6109 and we’ll take a look.
Not if the chimney is uncapped or hasn’t been looked at since you bought the property. Unused chimneys in Winchester collect nests, dust, and sometimes dead animals, and a blocked flue becomes a carbon monoxide risk the first time a tenant lights a fire. At a tract home off Boulder Highway, our tech pulled a bird nest from an uncapped metal flue in a rental where the tenant had reported smoke backup all winter. A camera inspection showed first-degree creosote glazing and corrosion pinholes in the liner. We replaced the cap and scheduled a liner remediation before the first fall fire. That’s a $400 inspection that prevented a far bigger problem. We’ll give you a written quote before we touch anything.
Winchester’s dry air means creosote doesn’t build up as fast as it does in humid climates, but when it does form, it tends to be the hard, glazed type that sticks to metal flue walls and won’t brush out with normal sweeping. That’s a hot, difficult fuel source, and it’s more common in rental homes where fires are burned with whatever wood is handy, often not fully seasoned. We’ll tell you if your creosote is a sweep away or a removal job, and you’ll see it on camera before you decide. Call (725) 220-6109 for a free estimate.
Yes, but the risk profile is different. Masonry chimneys fail from water and freeze-thaw cycles. Winchester’s prefabricated metal chimneys fail from internal corrosion, usually driven by alkaline dust settling inside the flue. The inspection still covers the same points, crown, cap, flashing, liner, clearances, but we’re looking harder for pinholes and seam separation than for spalled brick. That’s why we run a camera on every prefab inspection. If you’re not sure what kind of chimney you have, we’ll tell you when we arrive, and you’ll see what we see in the photo report.
Written by Nathan Corliss, Owner at Ashby Chimney Las Vegas, serving Winchester since 2002.