Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Paradise, NV | Ashby Chimney Las Vegas
We provide independent Chimney Sweep - Paradise services including HeatShield cleaning and repair across Paradise, from the ranch homes near Twain Avenue to the streets flanking the Boulevard Mall. The one thing that makes our HeatShield work here different is simple: we know what Paradise’s mid-century masonry does to HeatShield coatings over time, and we check for it before you light your first fire of the season. Ashby Chimney Las Vegas has been serving the valley since 2002. Call (725) 220-6109 for a free estimate on HeatShield service in Paradise.
Why Paradise Residents Choose Us for HeatShield Service
Our crews have rebuilt and coated hundreds of HeatShield systems across Las Vegas and Paradise without factory ties, using field-proven techniques for the mortar and flue tile adhesion issues HeatShield develops in desert heat and seasonal fire bursts. We’re not a HeatShield dealer and we don’t pretend to be. We’re an independent chimney company that’s seen enough HeatShield failures in Paradise’s 1960s and 1970s ranch homes to know exactly what works and what doesn’t. Nathan Corliss, our owner, learned the trade at Los Angeles Trade-Technical College before building Ashby Chimney on a simple habit: tell the customer the price before you touch anything, then put whatever you promised in writing. That’s how we handle every Paradise HeatShield job, whether it’s a cleaning, a Level 2 inspection, or a full resurfacing. For more on our HeatShield sales & service, we keep the same approach: written price first, written guarantee at the end.
Styles & brands we work with
Common HeatShield Chimney Cleaning Problems We Solve in Paradise
- Cerfractory sealant spalling at mortar joints. Paradise homeowners tend to burn hot fires after months of inactivity, and that thermal shock pops the HeatShield Cerfractory right off the mortar joints. We see it constantly on the block chimneys that came with the original ranch builds.
- Micro-cracking in resurfaced flue tiles. Roof temperatures here exceed 140°F in summer, then drop into the 30s on cold winter nights. HeatShield resurfacer expands and contracts with those swings, and after a few seasons, hairline cracks show up. We catch them during cleaning before they become smoke leaks.
- Adhesion failure where HeatShield meets original clay tile. Chimneys built in Paradise during the 1960s and 70s often have shifted or offset flue sections. HeatShield material doesn’t bond well to those transitions, and the coating lifts. We grind, degrease, and re-apply when the underlying tile is still sound.
- Glazed creosote on HeatShield coating surfaces. Infrequent, hot fires create hard, glazed creosote deposits that dry chemical cleaners can’t remove. It builds on HeatShield surfaces just like it does on bare clay, and it needs mechanical removal. We do that during every HeatShield cleaning in Paradise.
- Palm-frond-clogged spark arrestors above HeatShield flues. The wind blows palm debris onto Paradise roofs all year. When the spark arrestor clogs, draft drops, and smoke rolls back into the house. It also leaves an oily film inside the flue that hurts HeatShield bonding if you need a repair later.
HeatShield Service in Paradise: What Local Conditions Mean for Your Equipment
Paradise sits in a pocket of the valley where mid-century ranch homes dominate the landscape, and most of those chimneys were built without modern liners. The original brick or block flues have been baking in the desert sun for fifty or sixty years, and the mortar joints have weathered to the point where they absorb water during the rare rainstorms and then dry out fast. That cycle, combined with seasonal fire bursts, means HeatShield coatings in Paradise fail differently than they do in Summerlin South or Henderson. Nathan and our crew have watched HeatShield Cerfractory sealant hold up well on shaded chimneys but spall within two seasons on full-sun exposures near Twain Avenue. We plan our Paradise HeatShield cleanings around that reality: we inspect the coating’s bond on sun-facing flue sections first, because that’s where the damage starts.
HeatShield Models & Products We Service in Paradise
We work on the full HeatShield product line: HeatShield Cerfractory Flue Sealant, HeatShield Joint Repair System, HeatShield Resurfacing System, and HeatShield Smoke Chamber Repair. We use original HeatShield Cerfractory sealant and resurfacer kits, because aftermarket refractory mixes don’t match the thermal expansion rate or bond strength of the real thing. That matters in Paradise, where a 50-degree overnight temperature swing is normal. We stock the common HeatShield kits and can usually start a Paradise repair within a few days of your inspection. The one place we don’t cut corners: if the flue tiles underneath the HeatShield are structurally compromised, we’ll tell you a full liner replacement is the right call, not another coat.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Paradise
Most HeatShield chimney cleanings in Paradise run between $200 and $350, depending on the flue’s condition and how much glazed creosote has built up. Joint repairs typically land in the $800 to $1,500 range for a single flue section, and a full HeatShield resurfacing runs $3,000 to $6,000 depending on flue height and tile condition. What drives the cost here: whether you need degreasing before repair (common in Paradise due to that oily film from clogged spark arrestors), how many flue sections are cracked, and whether the original tiles are still sound. Every estimate is free and written before any work starts. Call (725) 220-6109 and we’ll walk you through the exact numbers for your Paradise chimney.
Serving Paradise, NV - Our Local Coverage Area
We’re based in the Paradise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in Paradise
It creates thermal shock. When you go months without a fire, then light a hot mesquite or oak fire on a cold night, the flue temperature jumps several hundred degrees in minutes. HeatShield Cerfractory handles that better than bare clay, but repeated cycles of cold-to-hot stress cause micro-cracking at mortar joints and along the tile surface. We see it most on Paradise chimneys that face south or west, where the afternoon sun has already heated the masonry before you even strike a match. Call (725) 220-6109 if your HeatShield coating is showing hairline cracks, and we’ll tell you honestly whether it’s cosmetic or needs work.
Yes, but only after proper prep. Spalled brick creates a rough, crumbling surface that prevents good adhesion. We grind out the loose material, repair the brick with a compatible refractory mortar, and then apply the HeatShield sealant in layers. If the spalling is extensive, we’ll recommend addressing the brick first, because HeatShield over unstable brick won’t last. In Paradise, where 1960s brick chimneys are the norm, we do this prep work on most HeatShield repairs we complete.
Usually it’s one of two things: the original application didn’t account for Paradise’s temperature swings, or the flue tiles underneath weren’t properly cleaned before the resurfacer went on. HeatShield material expands and contracts at a different rate than the clay tile it coats. If the bond isn’t perfect, the coating lifts. We also find cases where a previous contractor applied HeatShield over glazed creosote or soot, and the coating never bonded in the first place. We grind, degrease with the right solvent, and re-apply in two passes for a proper cure. Call (725) 220-6109 and we’ll figure out which problem you have before recommending a fix.
Not necessarily, but Paradise is one of the few places where we recommend checking it every single fall. The palm fronds and dust that blow across the valley clog spark arrestors fast, and a clogged arrestor starves your flue of air. Smoke backs up, your HeatShield coating gets coated with oily residue, and draft suffers. We check the spark arrestor on every Paradise cleaning, and if it’s clogged or corroded, we’ll show you before we replace it. It’s a $150 to $300 job depending on the cap style.
It depends on the flue’s condition. HeatShield resurfacing works when the original clay tiles are still structurally sound, just cracked or spalled. A stainless liner is the better choice when tiles are missing, shifted, or the flue is too deteriorated to support a coating. In Paradise’s unlined 1960s and 1970s chimneys, we frequently recommend a stainless liner with insulation, because the flues were never designed to handle the heat output of modern fireplaces. But if your tiles are intact and you just need the coating restored, HeatShield is a solid option. We’ll tell you which one fits your chimney after a Chimney Inspection - Paradise. Call (725) 220-6109 for a free estimate in Paradise.
Service Areas Near Paradise
Ashby Chimney Las Vegas handles HeatShield service across the valley. We cover all of Paradise service area, plus Las Vegas, Winchester, Southern Highlands, and Green Valley. If you’re in Summerlin South with a HeatShield issue, check our HeatShield service in Summerlin South page. For the broader metro, see HeatShield service in Las Vegas.
Book Your HeatShield Service in Paradise Today
If your HeatShield flue needs cleaning, inspection, or repair in Paradise, call Ashby Chimney Las Vegas at (725) 220-6109. We answer the phone with a live person, give you a written price before any work starts, and stand behind every HeatShield repair with our 365-Day Done Right Promise. Same-week appointments are usually available for Paradise homeowners.
Written by Nathan Corliss, Owner at Ashby Chimney Las Vegas, serving Paradise since 2002.